[Mimedefang] 450 4.7.1 error using Postfix/MIMEDefang/milter-manager

[Larry G. Wapnitsky]

Same error

Larry G. Wapnitsky MBA, MCSE, MCP+I
IT SUPPORT & ADMINISTRATION COORDINATOR
WRT  |  Wallace Roberts & Todd, LLC
1700 Market Street, 28th Fl
Philadelphia, PA 19103
T  215.430.5068
C  215.713.8635
E  lwapnitsky at WRTdesign.com


-----Original Message-----
From: Philip Prindeville [mailto:philipp_subx at redfish-solutions.com] 
Sent: Wednesday, November 09, 2011 3:38 PM
To: Larry G. Wapnitsky
Subject: Re: [Mimedefang] 450 4.7.1 error using
Postfix/MIMEDefang/milter-manager

Just out of curiosity, what happens if you type:

mail from:<root>

instead, or even:

mail from:<root at wrtdesign.com>


On 11/9/11 8:25 AM, Larry G. Wapnitsky wrote:
> I'm running PF 2.7.1 with milter-manager handling my milters.  I have 
> MIMEDefang configured as one of the managed milters, but when I telnet

> to port 25 for testing, I receive the following:
> 
> root at mailproc:/etc/milter-manager# telnet localhost 25 Trying 
> 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> 220 mailproc.domain.com ESMTP Postfix (Debian/GNU) helo test
> 250 mailproc.domain.com
> mail from: root
> 451 4.7.1 Service unavailable - try again later
> 421 4.4.2 mailproc.domain.com Error: timeout exceeded Connection 
> closed by foreign host.
> root at mailproc:/etc/milter-manager#
> 
> The only changes I've made to the default mimedefang configuration at 
> /etc/default/mimedefang are:
> 
> SOCKET=inet:10025
> SYSLOG_FACILITY=mail
> 
> And my milter-manager.local.conf has only one entry consisting of:
> 
> define_milter("mimedefang") do |milter|
>   milter.description = "MIMEDefang"
>   milter.connection_spec = "inet:10025 at localhost"
>   milter.fallback_status = "accept"
>   milter.enabled = true
> end
> 
> 
> I've added the following to master.cf:
> 
> 
> scan      unix  -       -       n       -       10      smtp
>         -o smtp_send_xforward_command=yes
>         -o disable_mime_output_conversion=yes
>         -o smtp_generic_maps=
> 
> 
> And this to main.cf:
> 
> smtpd_milters = unix:/milter-manager/milter-manager.sock
> 
> milter_default_action = accept
> milter_protocol = 6
> milter_mail_macros = {auth_author} {auth_type} {auth_authen}
> 
> Any help would be greatly appreciated.  FYI - this is my first 
> experience with milters, and I've read tons of documentation but 
> haven't been able to diagnose this yet.
> 
> Thanks,
> 
> Larry




----wrtmail--%3423wrt%----