[Mimedefang] all_spam_to question

Fred Felgenhauer fred at fredf.com
Sat Jan 24 13:36:22 EST 2004


Here is my filter.

/etc/sysconfig/mimedefang contains  MX_RECIPIENT_CHECK=yes.


# -*- Perl -*-
#***********************************************************************
#
# mimedefang-filter
#
# Suggested minimum-protection filter for Microsoft Windows clients, plus
# SpamAssassin checks if SpamAssassin is installed.
#
# Copyright (C) 2002 Roaring Penguin Software Inc.
#
# This program may be distributed under the terms of the GNU General
# Public License, Version 2, or (at your option) any later version.
#
# $Id: suggested-minimum-filter-for-windows-clients,v 1.61 2003/03/21
21:00:02 dfs Exp $
#***********************************************************************

#***********************************************************************
# Set administrator's e-mail address here.  The administrator receives
# quarantine messages and is listed as the contact for site-wide
# MIMEDefang policy.  A good example would be 'defang-admin at mydomain.com'
#***********************************************************************
$AdminAddress = 'xxxxxx at xxxxx.com';
$AdminName = "Spam Administrator";
#***********************************************************************
# Set the e-mail address from which MIMEDefang quarantine warnings and
# user notifications appear to come.  A good example would be
# 'mimedefang at mydomain.com'.  Make sure to have an alias for this
# address if you want replies to it to work.
#***********************************************************************
$DaemonAddress = 'SpamAssassin at localhost';
$GeneralWarning = "";
#***********************************************************************
# If you set $AddWarningsInline to 1, then MIMEDefang tries *very* hard
# to add warnings directly in the message body (text or html) rather
# than adding a separate "WARNING.TXT" MIME part.  If the message
# has no text or html part, then a separate MIME part is still used.
#***********************************************************************
$AddWarningsInline = 0;
#$LDAPServer = "";
#***********************************************************************
# To enable syslogging of virus and spam activity, add the following
# to the filter:
# md_log_enable();
# You may optionally provide a syslogging facility by passing an
# argument such as:  md_log_enable('local4');  If you do this, be
# sure to setup the new syslog facility (probably in /etc/syslog.conf).
# An optional second argument causes a line of output to be produced
# for each recipient (if it is 1), or only a single summary line
# for all recipients (if it is 0.)  The default is 1.
# Comment this line out to disable logging.
#***********************************************************************
md_graphdefang_log_enable('mail', 1);

#***********************************************************************
# Uncomment this to block messages with more than 50 parts.  This will
# *NOT* work unless you're using Roaring Penguin's patched version
# of MIME tools, version MIME-tools-5.411a-RP-Patched-02 or later.
#
# WARNING: DO NOT SET THIS VARIABLE unless you're using at least
# MIME-tools-5.411a-RP-Patched-02; otherwise, your filter will fail.
#***********************************************************************
# $MaxMIMEParts = 50;

#***********************************************************************
# Set various stupid things your mail client does below.
#***********************************************************************

# Set the next one if your mail client cannot handle nested multipart
# messages.  DO NOT set this lightly; it will cause action_add_part to
# work rather strangely.  Leave it at zero, even for MS Outlook, unless
# you have serious problems.
$Stupidity{"flatten"} = 0;

# Set the next one if your mail client cannot handle multiple "inline"
# parts.
$Stupidity{"NoMultipleInlines"} = 0;


# This procedure returns true for entities with bad filenames.
#sub filter_bad_filename ($) {
#    my($entity) = @_;
#    my($bad_exts, $re);

    # Bad extensions
#    $bad_exts =
'(ade|adp|app|asd|asf|asx|bas|bat|chm|cmd|com|cpl|crt|dll|exe|fxp|hlp|hta|ht
o|inf|ini|ins|isp|jse?|lib|lnk|mdb|mde|msc|msi|msp|mst|ocx|pcd|pif|prg|reg|s
cr|sct|sh|shb|shs|sys|url|vb|vbe|vbs|vcs|vxd|wmd|wms|wmz|wsc|wsf|wsh|\{)';

    # Do not allow:
    # - curlies
    # - bad extensions (possibly with trailing dots) at end or
    #   followed by non-alphanum
 #   $re = '\.' . $bad_exts . '\.*([^-A-Za-z0-9_.,]|$)';
 #   return re_match($entity, $re);
#}

# Scan for a virus using the first supported virus scanner we find.
#sub message_contains_virus () {
#    return message_contains_virus_avp()      if ($Features{'Virus:AVP'});
#    return message_contains_virus_fprot()    if ($Features{'Virus:FPROT'});
#    return message_contains_virus_fsav()     if ($Features{'Virus:FSAV'});
#    return message_contains_virus_hbedv()    if ($Features{'Virus:HBEDV'});
#    return message_contains_virus_nai()      if ($Features{'Virus:NAI'});
#    return message_contains_virus_nvcc()     if ($Features{'Virus:NVCC'});
#    return message_contains_virus_rav()      if ($Features{'Virus:RAV'});
#    return message_contains_virus_sophie()   if
($Features{'Virus:SOPHIE'});
#    return message_contains_virus_trophie()  if
($Features{'Virus:TROPHIE'});
#    return message_contains_virus_sophos()   if
($Features{'Virus:SOPHOS'});
#    return message_contains_virus_trend()    if ($Features{'Virus:TREND'});
#    return message_contains_virus_filescan() if
($Features{'Virus:FileScan'});
#    return message_contains_virus_clamd()    if ($Features{'Virus:CLAMD'});
#    return message_contains_virus_clamav()   if
($Features{'Virus:CLAMAV'});
#    return message_contains_virus_carrier_scan() if
($Features{'Virus:SymantecCSS'});
#    return (wantarray ? (0, 'ok', 'ok') : 0);
#}

# Scan for a virus using the first supported virus scanner we find.
#sub entity_contains_virus ($) {
#    my($e) = @_;
#    return entity_contains_virus_avp($e)      if ($Features{'Virus:AVP'});
#    return entity_contains_virus_fprot($e)    if
($Features{'Virus:FPROT'});
#    return entity_contains_virus_fsav($e)     if ($Features{'Virus:FSAV'});
#    return entity_contains_virus_hbedv($e)    if
($Features{'Virus:HBEDV'});
#    return entity_contains_virus_nai($e)      if ($Features{'Virus:NAI'});
#    return entity_contains_virus_nvcc($e)     if ($Features{'Virus:NVCC'});
#    return entity_contains_virus_rav($e)      if ($Features{'Virus:RAV'});
#    return entity_contains_virus_sophie($e)   if
($Features{'Virus:SOPHIE'});
#    return entity_contains_virus_trophie($e)  if
($Features{'Virus:TROPHIE'});
#    return entity_contains_virus_sophos($e)   if
($Features{'Virus:SOPHOS'});
#    return entity_contains_virus_trend($e)    if
($Features{'Virus:TREND'});
#    return entity_contains_virus_filescan($e) if
($Features{'Virus:FileScan'});
#    return entity_contains_virus_clamd($e)    if
($Features{'Virus:CLAMD'});
#    return entity_contains_virus_clamav($e)   if
($Features{'Virus:CLAMAV'});
#    return entity_contains_virus_carrier_scan($e) if
($Features{'Virus:SymantecCSS'});
#    return (wantarray ? (0, 'ok', 'ok') : 0);
#}

#***********************************************************************
# %PROCEDURE: filter_begin
# %ARGUMENTS:
#  None
# %RETURNS:
#  Nothing
# %DESCRIPTION:
#  Called just before e-mail parts are processed
#***********************************************************************
sub filter_begin () {
if (stream_by_recipient()) {
        return;
}

    # ALWAYS drop messages with suspicious chars in headers
#    if ($SuspiciousCharsInHeaders) {
#        md_log('suspicious_chars');
#	action_quarantine_entire_message("Message quarantined because of
suspicious characters in headers");
	# Do NOT allow message to reach recipient(s)
#	return action_discard();
#    }

    # Scan for viruses if any virus-scanners are installed
#    my($code, $category, $action) = message_contains_virus();

    # Lower level of paranoia - only looks for actual viruses
#    $FoundVirus = ($category eq "virus");

    # Higher level of paranoia - takes care of "suspicious" objects
    # $FoundVirus = ($action eq "quarantine");

#    if ($action eq "tempfail") {
#	action_tempfail("Problem running virus-scanner");
#	md_syslog('warning', "Problem running virus scanner: code=$code,
category=$category, action=$action");
 #   }
}

#***********************************************************************
# %PROCEDURE: filter
# %ARGUMENTS:
#  entity -- a Mime::Entity object (see MIME-tools documentation for
details)
#  fname -- the suggested filename, taken from the MIME Content-Disposition:
#           header.  If no filename was suggested, then fname is ""
#  ext -- the file extension (everything from the last period in the name
#         to the end of the name, including the period.)
#  type -- the MIME type, taken from the Content-Type: header.
#
#  NOTE: There are two likely and one unlikely place for a filename to
#  appear in a MIME message:  In Content-Disposition: filename, in
#  Content-Type: name, and in Content-Description.  If you are paranoid,
#  you will use the re_match and re_match_ext functions, which return true
#  if ANY of these possibilities match.  re_match checks the whole name;
#  re_match_ext checks the extension.  See the sample filter below for
usage.
# %RETURNS:
#  Nothing
# %DESCRIPTION:
#  This function is called once for each part of a MIME message.
#  There are many action_*() routines which can decide the fate
#  of each part; see the mimedefang-filter man page.
#***********************************************************************
sub filter_recipient {

my ($recipient, $sender, $ip, $hostname, $first, $helo, $rcpt_mailer,
$rcpt_host, $rcpt_addr) = @_;

#md_syslog('warning',"$recipient found in filter_recpient Sender is
$sender\n");
#	if ( $recipient =~ /<xxx\@xxxx.com>/ ) {

#		return('ACCEPT_AND_NO_MORE_FILTERING', "ok");
 #       } else {

#		return('CONTINUE', "ok");
  #      }



#return ('CONTINUE', 'ok');

}
sub filter ($$$$) {
    my($entity, $fname, $ext, $type) = @_;

    return if message_rejected(); # Avoid unnecessary work

    # Block message/partial parts
#    if (lc($type) eq "message/partial") {
#        md_log('message/partial');
#	action_bounce("MIME type message/partial not accepted here");
#	return action_discard();
#    }

    # Virus scan
#    if ($FoundVirus) {
#	my($code, $category, $action);
#	$VirusScannerMessages = "";
#	($code, $category, $action) = entity_contains_virus($entity);
	# If you are more paranoid, change to: if ($action eq "quarantine") {
#	if ($category eq "virus") {
#            md_log('virus',$VirusName, $RelayAddr);

	    # Bounce the mail!
#	    action_bounce("Virus $VirusName found in mail - rejected");

	    # But quarantine the part for examination later.  Comment
	    # the next line out if you don't want to bother.
#	    action_quarantine($entity, "A known virus was discovered and deleted.
Virus-scanner messages follow:\n$VirusScannerMessages\n\n");

#	    return;
#	}
#	if ($action eq "tempfail") {
#	    action_tempfail("Problem running virus-scanner");
#	    md_syslog('warning', "Problem running virus scanner: code=$code,
category=$category, action=$action");
#	}
#    }

#    if (filter_bad_filename($entity)) {
#        md_log('bad_filename', $fname, $type);
#	return action_drop_with_warning("An attachment named $fname was removed
from this document as it\nconstituted a security hazard.  If you require
this document, please contact\nthe sender and arrange an alternate means of
receiving it.\n");
#    }

    # eml is bad if it's not multipart
#    if (re_match($entity, '\.eml')) {
#        md_log('non_multipart');
#	return action_quarantine($entity, "A non-multipart attachment named $fname
was removed from this document as it\nconstituted a security hazard.  If you
require this document, please contact\nthe sender and arrange an alternate
means of receiving it.\n");
#    }
    # Clean up HTML if Anomy::HTMLCleaner is installed.
 #   if ($Features{"HTMLCleaner"}) {
#	if ($type eq "text/html") {
#	    return anomy_clean_html($entity);
#	}
#    }

    return action_accept();
}

#***********************************************************************
# %PROCEDURE: filter_multipart
# %ARGUMENTS:
#  entity -- a Mime::Entity object (see MIME-tools documentation for
details)
#  fname -- the suggested filename, taken from the MIME Content-Disposition:
#           header.  If no filename was suggested, then fname is ""
#  ext -- the file extension (everything from the last period in the name
#         to the end of the name, including the period.)
#  type -- the MIME type, taken from the Content-Type: header.
# %RETURNS:
#  Nothing
# %DESCRIPTION:
#  This is called for multipart "container" parts such as message/rfc822.
#  You cannot replace the body (because multipart parts have no body),
#  but you should check for bad filenames.
#***********************************************************************
sub filter_multipart ($$$$) {
#    my($entity, $fname, $ext, $type) = @_;

#    if (filter_bad_filename($entity)) {
#        md_log('bad_filename', $fname, $type);
#	action_notify_administrator("A MULTIPART attachment of type $type, named
$fname was dropped.\n");
#	return action_drop_with_warning("An attachment of type $type, named $fname
was removed from this document as it\nconstituted a security hazard.  If you
require this document, please contact\nthe sender and arrange an alternate
means of receiving it.\n");
#    }

    # eml is bad if it's not message/rfc822
#    if (re_match($entity, '\.eml') and ($type ne "message/rfc822")) {
#        md_log('non_rfc822',$fname);
#	return action_drop_with_warning("A non-message/rfc822 attachment named
$fname was removed from this document as it\nconstituted a security hazard.
If you require this document, please contact\nthe sender and arrange an
alternate means of receiving it.\n");
#    }

    # Block message/partial parts
#    if (lc($type) eq "message/partial") {
#        md_log('message/partial');
#	action_bounce("MIME type message/partial not accepted here");
#	return;
#    }

#    return action_accept();
}


#***********************************************************************
# %PROCEDURE: defang_warning
# %ARGUMENTS:
#  oldfname -- the old file name of an attachment
#  fname -- the new "defanged" name
# %RETURNS:
#  A warning message
# %DESCRIPTION:
#  This function customizes the warning message when an attachment
#  is defanged.
#***********************************************************************
sub defang_warning ($$) {
#    my($oldfname, $fname) = @_;
#    return
#	"An attachment named '$oldfname' was converted to '$fname'.\n" .
#	"To recover the file, right-click on the attachment and Save As\n" .
#	"'$oldfname'\n";
}

# If SpamAssassin found SPAM, append report.  We do it as a separate
# attachment of type text/plain
sub filter_end ($) {
    my($entity) = @_;

    # If you want quarantine reports, uncomment next line
    # send_quarantine_notifications();

    # IMPORTANT NOTE:  YOU MUST CALL send_quarantine_notifications() AFTER
    # ANY PARTS HAVE BEEN QUARANTINED.  SO IF YOU MODIFY THIS FILTER TO
    # QUARANTINE SPAM, REWORK THE LOGIC TO CALL
send_quarantine_notifications()
    # AT THE END!!!

    # No sense doing any extra work
    return if message_rejected();

    # Spam checks if SpamAssassin is installed
#    if ($Features{"SpamAssassin"}) {
	$SALocalTestsOnly = 0;

	if (-s "./INPUTMSG" < 100*1024) {
	    # Only scan messages smaller than 100kB.  Larger messages
	    # are extremely unlikely to be spam, and SpamAssassin is
	    # dreadfully slow on very large messages.
	    my($hits, $req, $names, $report) = spam_assassin_check();
	    if ($hits >= $req) {
                md_graphdefang_log('spam', $hits, $RelayAddr);
		my($score);
		if ($hits < 40) {
		    $score = "*" x int($hits);
		} else {
		    $score = "*" x 40;
		}
		# We add a header which looks like this:
		# X-Spam-Score: 6.8 (******) NAME_OF_TEST,NAME_OF_TEST
		# The number of asterisks in parens is the integer part
		# of the spam score clamped to a maximum of 40.
		# MUA filters can easily be written to trigger on a
		# minimum number of asterisks...
		action_change_header("X-Spam-Score", "$hits $names");
		md_syslog('warning',"X-Spam-Score: $hits\n");
		action_delete_header("X-Spam-Flag");
		action_delete_header("X-Scanned-By");
		md_graphdefang_log('RuleHits',$names,$RelayAddr);
		action_add_header("X-Spam-Flag","YES");
		action_change_header("Subject","*****SPAM***** $Subject");
		# If you find the SA report useful, add it, I guess...
		action_add_part($entity, "text/plain", "-suggest",
		                "$report\n",
				"SpamRanger.txt", "inline");



		# if ($hits > 20) {
                    #action_discard();
		#	action_bounce("SPAM not welcome here");
               # }
	    } else {
		# Delete any existing X-Spam-Score header?
		action_delete_header("X-Spam-Score");
		action_delete_header("X-Spam-Flag");
		action_delete_header("X-Scanned-By");
		md_graphdefang_log('not_spam',,$RelayAddr);
		action_add_header("X-Spam-Flag","NO");
		action_add_header("X-Spam-Score", "$hits $names");

	}
    }

    # I HATE HTML MAIL!  If there's a multipart/alternative with both
    # text/plain and text/html parts, nuke the text/html.  Thanks for
    # wasting our disk space and bandwidth...

    # If you don't mind HTML mail, comment out the next line.
   # remove_redundant_html_parts($entity);
}

# DO NOT delete the next line, or Perl will complain.
1;



More information about the MIMEDefang mailing list