[Mimedefang] uv scan is hanging

Seelig, CD (Chris) C.D.Seelig at rl.ac.uk
Mon Feb 9 06:51:31 EST 2004


Try adding the line 

export LD_PRELOAD=/lib/libc.so.6

Towards the top of the script from which you start the mimedefang daemons
(probably /etc/rc.d/init.d/mimedefang)

A different solution, which I use, and which is probably the same problem
is... 

export LD_ASSUME_KERNEL=2.4.1

I have several virtually identical systems and some suffer from this while
others don't, I guess there are some small differences in which versions of
libraries I have on different systems, I haven't investigated thoroughly
yet.

Chris



> -----Original Message-----
> From: Andrew Jayes [mailto:andrew.jayes at visitheartofengland.com] 
> Sent: 09 February 2004 10:01
> To: mimedefang at lists.roaringpenguin.com
> Subject: RE: [Mimedefang] uv scan is hanging
> 
> 
> Hi,
> 	It does seam to be the problem described below, in the 
> NAI knowledge base. So when I use the 
> 'LD_PRELOAD=/lib/libc.so.6 uvscan' command the scanner works 
> fine can anyone tell me how I can set this up to be used by 
> mimedefang. Maybe I could use an alias so when mimedefang 
> runs 'uvscan' it will actually run LD_PRE.....? 
> 
> Give me a shout if you've got any other ideas,
> 
> And I am running the 4320 scan engine
> 
> andrew
> 
> 
> 
> -----Original Message-----
> From: Alexander Dalloz [mailto:alexander.dalloz at uni-bielefeld.de] 
> Sent: 06 February 2004 15:46
> To: mimedefang at lists.roaringpenguin.com
> Subject: Re: [Mimedefang] uv scan is hanging
> 
> Am Fr, den 06.02.2004 schrieb Andrew Jayes um 15:44:
> > Hi,
> > 	Well if my other post turns up, I can say that I have now found
> > my .sock and got everything sorted. The next problem I have 
> is that when
> > I try to send a mail (using telnet session) in to the 
> server it seam's
> > uvscan is hanging, this means that in the session I can't 
> terminate the
> > mail with '.' eventually I just get 'try again later'. On 
> the mail box
> > using ps axf I can see that uvscan is has been running for 
> 10 minutes.
> > 
> > I'm running fedora core 1
> > 
> > Anyone got any suggestions?
> > 
> > Andrew 
> 
> You might face this know issue:
> 
https://knowledgemap.nai.com/phpclient/viewKDoc.aspx?externalID=KB_NAI31418&
sliceID=&docID=KC.KB_NAI31418&url=kb/kb_nai31418.xml&dialogID=152376&docType
=DOC_KnowledgeBase&userType=3&iterationID=1&sessionID=Anonymous|1768269092&u
serID=&docName=Solution%20ID%20NAI31418%20-%20VirusScan%20for%20Unix%20does%
20not%20run%20on%20Red%20Hat%20Linux%209&sourceKmap=&viewFrom=Main

Sorry, this URI is that long. Btw. on my FC1 system uvscan works
properly.

Alexander


-- 
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2149.nptl
Sirendipity 16:43:44 up 6 days, 15:43, load average: 0.27, 0.29, 0.20 
                   [ Γνωθι σ'αυτον - gnothi seauton ]

_______________________________________________
Visit http://www.mimedefang.org and http://www.canit.ca
MIMEDefang mailing list
MIMEDefang at lists.roaringpenguin.com
http://lists.roaringpenguin.com/mailman/listinfo/mimedefang

_______________________________________________
Visit http://www.mimedefang.org and http://www.canit.ca
MIMEDefang mailing list
MIMEDefang at lists.roaringpenguin.com
http://lists.roaringpenguin.com/mailman/listinfo/mimedefang



More information about the MIMEDefang mailing list