[Mimedefang] Desparate for help

Link, Pete plink at fna.com
Tue Oct 22 15:33:01 EDT 2002


Thanks, Barry, this has solved my problem.

Additional Questions to the LIST:
1.  What are you setting your SPAMASSASSIN Required_hits to??? in
/etc/mail/spamassassin/sa-mimedefang.cf
	I tried 3 and it seems to reject 10 out of my 26 Actual Spam
Messages received by me sometimes in the past.
	Is this acceptable???  Are you'll getting better results???

2.  Are there any other script configurations that can be set to bust more
SPAM?

> -----Original Message-----
> From:	Barry Byrne [SMTP:barry.byrne at wbtsystems.com]
> Sent:	Tuesday, October 22, 2002 12:39 PM
> To:	mimedefang at lists.roaringpenguin.com
> Subject:	RE: [Mimedefang] Desparate for help
> 
> >     147         open(IN, "<./HEADERS");
> >     148         while() {
> 
> Perhaps line 148 should read:	while(<IN>) {
> 
>  - Barry
> 
> --
> Barry Byrne, IT Manager,
> WBT Systems, Block 2, Harcourt Centre
> Harcourt Street, Dublin 2, Ireland
> 
> 
> > -----Original Message-----
> > From: mimedefang-admin at lists.roaringpenguin.com
> > [mailto:mimedefang-admin at lists.roaringpenguin.com]On Behalf Of Link,
> > Pete
> > Sent: 22 October 2002 18:11
> > To: 'mimedefang at lists.roaringpenguin.com'
> > Subject: RE: [Mimedefang] Desparate for help
> >
> >
> > Additional stuff I found:
> >
> > Anyone can heLP???  Any CLUES???
> >
> > -I turned all logging on that I could find and I found this in
> > /var/log/maillog:
> >
> > Oct 22 11:52:32 mail2 mimedefang-multiplexor: Slave 0 stderr: Use of
> > uninitialized value in pattern match (m//) at /etc/mail/mimedefang-filt
> > er line 149. Use of uninitialized value in pattern match (m//) at
> > /etc/mail/mimedefang-filter line 149. Use of uninitialized value in
> patter
> > n match (m//) at /etc/mail/mimedefang-filter line 149. Use of
> > uninitialized
> > value in pattern match (m//) at /etc/mail/mimedefang-filter line
> >  149. Use of uninitialized value in pattern match (m//) at
> > /etc/mail/mimedefang-filter line 149. Use of uninitialized value
> > in pattern
> > match
> >  (m//) at /et
> >
> > /etc/mail/mimedefang-filter line 149 contains the following:
> >     146     if($bounce eq "no") {
> >     147         open(IN, "<./HEADERS");
> >     148         while() {
> >     149             if(/beleskari/i) {
> >     150                 $bounce = "yes";
> >     151                 action_quarantine_entire_message();
> >     152                 action_bounce("Porn not welcome here");
> >     153                 last;
> >     154             }
> >     155         }
> >     156         close(IN);
> >     157     }
> >
> > > -----Original Message-----
> > > From:	Link, Pete [SMTP:plink at fna.com]
> > > Sent:	Tuesday, October 22, 2002 11:47 AM
> > > To:	'mimedefang at lists.roaringpenguin.com'
> > > Subject:	[Mimedefang] Desparate for help
> > >
> > > 	I don't mean to sound desperate, but I am since I am making no
> > > progress.
> > >
> > > 	1.  It appears that the mimedefang-multiplexor process is dying
> > > after it is exectured for the first time when it executes the 1st SPAM
> > > Mail.
> > > Not sure how to solve this.
> > >
> > > 	This is what I did:
> > > > I checked the perl scripts for correctness:
> > > > Cd /etc/mail/
> > > > [root at mail2 mail]# mimedefang.pl -test
> > > > Filter /etc/mail/mimedefang-filter seems syntactically correct.
> > > >
> > > 	This is what I see in the Maillog:
> > > 	I kept increasing the BUSY TIMEOUT for MIMEDEFANG; however nothing
> > > seems to help.
> > >
> > > > cat /var/log/maillog | grep ERR
> > > > Oct 18 15:38:59 mail2 mimedefang[8283]: Error from multiplexor: ERR
> > > Filter
> > > > timed out - check filter rules or system load
> > > > Oct 18 15:42:27 mail2 mimedefang[8290]: Error from multiplexor: ERR
> > > Filter
> > > > timed out - system may be overloaded (consider increasing
> > busy timeout)
> > > >
> > > > cat /var/log/maillog | grep mimedefang-multiplexor
> > > > Oct 18 15:42:36 mail2 mimedefang-multiplexor: Slave died
> > prematurely --
> > > > check your filter rules and use the '-l' flag on
> > mimedefang-multiplexor
> > > to
> > > > see Perl error messages
> > > > Oct 18 15:42:49 mail2 mimedefang-multiplexor: Slave died
> > prematurely --
> > > > check your filter rules and use the '-l' flag on
> > mimedefang-multiplexor
> > > to
> > > > see Perl error messages
> > > > Oct 18 15:42:54 mail2 mimedefang-multiplexor: Slave died
> > prematurely --
> > > > check your filter rules and use the '-l' flag on
> > mimedefang-multiplexor
> > > to
> > > > see Perl error messages
> > > > Oct 18 15:43:05 mail2 mimedefang-multiplexor: Slave died
> > prematurely --
> > > > check your filter rules and use the '-l' flag on
> > mimedefang-multiplexor
> > > to
> > > > see Perl error messages
> > > > Oct 18 15:43:09 mail2 mimedefang-multiplexor: Slave died
> > prematurely --
> > > > check your filter rules and use the '-l' flag on
> > mimedefang-multiplexor
> > > to
> > > > see Perl error messages
> > > > Oct 18 15:55:55 mail2 mimedefang-multiplexor: WARNING: You are
> running
> > > > mimedefang-multiplexor as root.  Future versions of MIMEDefang may
> > > refuse
> > > > to run as root.
> > > > Oct 18 15:55:55 mail2 mimedefang-multiplexor: started; minSlaves=0,
> > > > maxSlaves=2, maxRequests=100, maxIdleTime=300, busyTimeout=120,
> > > > clientTimeout=10
> > > > Oct 18 15:56:13 mail2 mimedefang-multiplexor: WARNING: You are
> running
> > > > mimedefang-multiplexor as root.  Future versions of MIMEDefang may
> > > refuse
> > > > to run as root.
> > > > Oct 18 15:56:13 mail2 mimedefang-multiplexor: started; minSlaves=0,
> > > > maxSlaves=2, maxRequests=100, maxIdleTime=300, busyTimeout=120,
> > > > clientTimeout=10
> > > > Oct 18 15:56:41 mail2 mimedefang-multiplexor: Received
> > SIGTERM: Killing
> > > > slaves and terminating
> > > > Oct 18 15:56:41 mail2 mimedefang-multiplexor: Received
> > SIGTERM: Killing
> > > > slaves and terminating
> > > > Oct 18 15:56:52 mail2 mimedefang-multiplexor: WARNING: You are
> running
> > > > mimedefang-multiplexor as root.  Future versions of MIMEDefang may
> > > refuse
> > > > to run as root.
> > > > Oct 18 15:56:52 mail2 mimedefang-multiplexor: started; minSlaves=0,
> > > > maxSlaves=2, maxRequests=100, maxIdleTime=300, busyTimeout=120,
> > > > clientTimeout=10
> > > >
> > > _______________________________________________
> > > MIMEDefang mailing list
> > > MIMEDefang at lists.roaringpenguin.com
> > > http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
> > _______________________________________________
> > MIMEDefang mailing list
> > MIMEDefang at lists.roaringpenguin.com
> > http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
> >
> 
> _______________________________________________
> MIMEDefang mailing list
> MIMEDefang at lists.roaringpenguin.com
> http://lists.roaringpenguin.com/mailman/listinfo/mimedefang



More information about the MIMEDefang mailing list