[Mimedefang] Stumped on mimedefang-2.21 upgrade

[Brett Simpson]

The ls -lR did go into all of the subdirectories and their set to read for the world permissions.

>>> dant at wetsnow.com 10/11/02 22:37 PM >>>
Make sure that all the files in the subdirectories (specifically the
packages you had recently installed) have world read permissions.

This may not be it, but it was what stopped mine from working with no
errors.

Dan

----- Original Message -----
From: "Brett Simpson" <simpsonb at hillsboroughcounty.org>
To: <mimedefang at lists.roaringpenguin.com>
Sent: Friday, October 11, 2002 9:34 PM
Subject: Re: [Mimedefang] Stumped on mimedefang-2.21 upgrade


> Mine are in the same place as yours. Doing an ls -lR I saw that all files
in that directory had at least read on the world permission.
>
> Brett
>
> >>> dant at wetsnow.com 10/11/02 21:16 PM >>>
> Check the files installed and used by perl.. the modules.
>
> Mine are here:
>
> /usr/lib/perl5/site_perl/5.6.1
>
>
> Dan
>
> ----- Original Message -----
> From: "Brett Simpson" <Simpsonb at hillsboroughcounty.org>
> To: <mimedefang at lists.roaringpenguin.com>
> Sent: Friday, October 11, 2002 5:11 PM
> Subject: RE: [Mimedefang] Stumped on mimedefang-2.21 upgrade
>
>
> > What perl files should I check? I looked at mimedefang.pl and it is set
to
> 755.
> >
> > Brett
> >
> > >>> dant at wetsnow.com 10/11/02 05:00PM >>>
> > Check the permissions on all the relevant perl files.  I had that
> > problem too.  Turned out some files were not world readable.
> >
> > You'll need to restart sendmail after you chmod them.
> >
> > Dan
> >
> >
> > > -----Original Message-----
> > > From: mimedefang-admin at lists.roaringpenguin.com
> > > [mailto:mimedefang-admin at lists.roaringpenguin.com] On Behalf
> > > Of Brett Simpson
> > > Sent: Friday, Ocober 11, 2002 4:19 PM
> > > To: mimedefang at lists.roaringpenguin.com
> > > Subject: [Mimedefang] Stumped on mimedefang-2.21 upgrade
> > >
> > >
> > > I had mimedefang 2.19 working great with Sendmail 8.12.5 on a
> > > Redhat Linux 7.2 test server... and then decided to upgrade
> > > to mimedefang 2.21. I can start up mimedefang ok and see the
> > > slaves come up in my maillog but when I send an email through
> > > it doesn't modify the header to say
> > > X-Scanned-By: MIMEDefang 2.21. What should I do next?
> > >
> > > I also downloaded and installed the following.
> > >
> > >     * MIME-tools-5.411a-RP-Patched-02.tar.gz (Roaring Penguin patched
> > > version!)
> > >     * IO-stringy-1.212tar.gz
> > >     * MIME-Base64-2.11.tar.gz
> > >     * MailTools-1.1401.tar.gz
> > > * Digest-SHA1-2.00.tar.gz
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > MIMEDefang mailing list
> > > MIMEDefang at lists.roaringpenguin.com
> > > http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
> > >
> >
> > _______________________________________________
> > MIMEDefang mailing list
> > MIMEDefang at lists.roaringpenguin.com
> > http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
> >
> >
> > _______________________________________________
> > MIMEDefang mailing list
> > MIMEDefang at lists.roaringpenguin.com
> > http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
> >
>
> _______________________________________________
> MIMEDefang mailing list
> MIMEDefang at lists.roaringpenguin.com
> http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
>
>
> _______________________________________________
> MIMEDefang mailing list
> MIMEDefang at lists.roaringpenguin.com
> http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
>

_______________________________________________
MIMEDefang mailing list
MIMEDefang at lists.roaringpenguin.com
http://lists.roaringpenguin.com/mailman/listinfo/mimedefang